iteco IT 10151 - Electrolyte Level Check; Check of Battery Charge

72
IT10151 - IT12151
OPERATING AND MAINTENANCE HANDBOOK
Electrolyte level check
•Open the box
•Take away the electrolyte supplying caps
•Check the level and if it is the case top up with distilled water.
•Close caps and dry if some liquid has poured out.
The sulphuric acid contained in the solution could cause serious in-
juries; if it is unintentionally poured , wash immediately the objects
or the surfaces with abundant water.
If the acid comes into contact with skin or eyes wash immediately
and generously with water and seek a doctor.
It is recommended to always wear gloves and protective glasses
during the maintenance operations of baeries. Check of screw
tightening.
Check of baery charge
The baery charge level can be read on ground panel.
For the baery recharge see section “Baery recharge”.