iteco IT 10151 - Check of Engine Brushes; Check Brakes on Ramp; Braking Spaces

80
IT10151 - IT12151
OPERATING AND MAINTENANCE HANDBOOK
Check of engine brushes
Check brush wear of electrical pump motor; replace if necessary.
Check brakes on ramp
Parking brakes must be capable to stop the machine on max. slope
indicated in the “Technical data” table.
Check that brakes stops on a slope indicated in the above mentioned
table.
Braking spaces
Carry out these tests with machine on at surface
FAST SPEED
•Select fast speed on platform control panel.
•Push joystick to maximum forward position.
•Release joystick and check that the braking space is lower than 60
cm.