iteco IT 10151 - Battery Recharge

59
IT10151 - IT12151
OPERATING AND MAINTENANCE HANDBOOK
Baery recharge
Baeries are the energy source of the machine. In order to use their
capacities in the best way without the risk of a premature decay, al-
ways carry out the recharge aer every use, independly to what the
charge indicator signals.
If the rechange has not carried out immediately, it could happen a
permanent damage to the baeries.
Leaving even only one night the baeries not charged, it could hap-
pen a permanent damage.
Do not replace the baeries with other ones having lowerer mass,
as these have also a stabilising function.
The baeries have to be charged with the provided baery charger
placed in the back le box.
Features
•Baery charger: 48V - 45A
•Power supply: 220V single-phase - 50Hz
•Voltage: 48V
•Charge time: about 10 hours
•Operating temperature: from -20°C to +50°C
•Protection against output short circuit
•Protection against polarity reversal (fuse)
•Weight: 5,5 Kg
•Connection to the net: standard 3 poles 230V outlet