iteco IT 10151 - To Minimize Hazards

16
IT10151 - IT12151
OPERATING AND MAINTENANCE HANDBOOK
To minimize hazards
Follow the here below instructions:
Precautions for the travelling with the lied platform
•Check the ground is rm and even.
• Do not use the machine on slippery, icy, muddy ground and with
holes, which has a slope higher than the allowed limit.
•Check that the ground where the machine has to operate is free from
holes, bumps, drops, uneven level, obstructions, debris, obstacles
and coverings which could hide possible potholes or others dan-
gers.
•Comply with the maximum load and the allowable number of per-
sons.
•Distribute the loads and place them if possible in the middle of the
platform.
•Make sure the ground resists to the force and load of tyres.
•Avoid the machine knocks against xed or mobile obstacles.
•Do not use the machine with materials suspended to the handrails
or to the scissors li.
• Give the best aention during movements with mobile travelling
platform.
• During movements, liing and lowering of the platform, check that
there are not obstructions around, over and under the machine.
•Carry out the movements only if the working area visibility is com-
plete.
•Do not work with wind having a speed higher than 12,5 m/s.
•Do not equip the machine with elements (ex. panels) which increase
the wind exposure.