iteco IT 10151 - Operators Requirements; The Operator Shall

12
IT10151 - IT12151
OPERATING AND MAINTENANCE HANDBOOK
Operator’s requirements
The operator shall:
• Read and well understand all the documentation enclosed to the
machine, be properly trained and instructed in the correct use of
the machine and know the safety rules and devices.
•Be of age
•Be physically in good conditions and not make use of dope, alcohol
or drugs that could aect the aention, the reaction, the sight and
the hearing.
• Make always use of an assistant in areas where the sight has ob-
structed.
• Use suitable accident prevention equipment accordingly with the
working conditions and the local rules in force.
• During the working keep all the parts of the body inside the railings
and both feet have to be rmly rest on the oor surface
• Give a great importance to the safety and refuse to work when you
state to not work under safe conditions.
•Always work under highest safe conditions, tidiness and cleaning.
•Make a daily check before using the machine and also to controls and
safety devices and make sure they are in perfect working order.
•Check the working area is free from persons, animals or obstacles
before making any movement of the machine.
• Check that the ground where the machine has to operate is free
from potholes, bumps, drops, uneven levels, obstructions, debris,
obstacles and coverings which could hide possible potholes or others
dangers.
•Well-know the allowable maximum capacity.
•Clean from oil and grease the ladder, the oor surface of the platform
and the handrails.
•Once the work has been nished and when the machine remains
unaended, switch the machine o and take the key o to avoid that
unauthorized persons can use it.