iteco IT 10151 - Platform Lifting;Lowering; Starting and Enabling Platform Controls

42
IT10151 - IT12151
5
1
1
6
OPERATING AND MAINTENANCE HANDBOOK
Platform liing/lowering
•Turn le the key in selector 1 by maintaining the position and move
selector 5 upwards in order to li platform or downwards to lower
platform.
Before liing or lowering the platform make sure that no obstacles
are present on or under it.
Starting and enabling platform controls
• Insert key in selector 1 and turn right, in order to put platform
controls into operation ; the pilot light 6 go on. The key remains in
xed position and it is possible to extract it.