17
IT10151 - IT12151
OPERATING AND MAINTENANCE HANDBOOK
Electric hazards
•To assure the earth-leakage of the electrostatic charges, the back parti-
tion of the machine is equipped with a conductive strip.
Always check the wear of this strip and there is the earth contact.
•As the machine is not electrically insulated, the operator has to pay
a particular aention to avoid any contact with probably energized
parts.
• As already mentioned in the section “Not allowable operations”,
do not carry out works near high-voltage transmission lines at a
distance lower than 5 meters
.
•Do not work in case of strong strom, with or without rain.
Explosion or burn hazards
•Do not use the machine near open ames or heat sources.
•Charge baeries in ventilated environment, far from heat sources
or explosive uids.
•Do not use the machine if there are oil leakage.
To Next Page
Loading...
