iteco IT 10151 - Page 15

15
IT10151 - IT12151
OPERATING AND MAINTENANCE HANDBOOK
• Increase the maximum available working height by puing ladders
or scaolds on the platform.
•Run on public roads.
•Move the machine with the opened box.
• Use the machine making sure the gate to be admied to the platform
is not closed.
• Use an horizontal force above 400N.
•Throw some objects and tools from the top to down and viceversa.
•Use the machine if the working area is not free from obstacles which
could cause dangerous conditions.
•Use the handrails as admiance means to get on or get down from
the platform.
•Get on or get down from the platform when it is in the liing posi-
tion.
•Operate or li the platform when it has placed on the truck loading
platform or other vehicle.
•Charge the baeries near sparkles of free ames.
• Li the platform making sure there are not any obstacles above
it.
•Work with a machine operating under bad working conditions.
•Enter in contact with xed or mobile objects.
•Place materials on the handrails.
• Equip the machine with elements (ex. panels) which increase the
wind exposure.