Jay electronique UR Series - Transmitter and Receiver Technical Characteristics

UR - 323245J - 55 -FRENDE
Material ABS, yellow
Tightness IP65
complies with ETS 300 220
Carrier UHF, frequency modulated (FM)
Frequencies 64 programmable frequencies
Frequency band 433.1 to 434.675 MHz
HF power < 10 mW (license not required) , built-in antenna
Average range 230 m in typical industrial environment *
600 m in unobstructed area
Type Lithium
Charge / discharge cycles 300 cycles min, (without damaging battery capacity)
Complete charging time
2h30, at +20°C
(if battery totally discharged)
For typical use of function buttons
50 H at 50% utilisation at +20°C
40 H at 50% utilisation at -20°C
Endurance after a 10 min. charge w hen
battery is discharged
around 1 h transmission time available
-20°C to +50°C
0°C to +40°C
-20°C to +50°C
Wall (fastening hook, support charger) or on belt by
fastening clip
240 g
46 x 78 x 143 mm
1 orange LED "Battery low" and "Diagnostic"
1 green LED "ON", "Battery charging" and
"Diagnostic"
* = Range will vary according to environment conditions of transmitter and reception antenna
(metal frameworks, walls … ).
Dimensions
Housing
Attachment when idle
Weight (with battery)
Storage temperature range
Charging temperature range
Endurance
Radio
Operating temperature range
Battery
Caution : charging outside this temperature range can be dangerous for the battery
Indicator lights
4.1- URE transmitter
4.1.1- Identity code
The transmitter and receiver are linked by an identity code.
A receiver can only recognise and execute commands generated by the associated
transmitter (with electronic key containing the receiver identity code).
- The receiver identity code is a unique, fixed code (it can't be reprogrammed).
This identity code is contained in the electronic key and can be copied to a transmitter
by a trained and authorized user (see 6.3.4)
Identity codes have 65536 different combinations.
4- Technical characterisitcs