jcb 8026 CTS - Dozer Controls

Operation
Operating Levers/Pedals
90 90
9811/9950-1
Dozer Controls
!MCAUTION
Before operating the dozer, make sure that large
rocks or other objects are not between it and the
tracks that can jam the mechanism.
MD-2-1-5
The dozer is operated by a single control lever C on the
right side of the cab. K Fig 41. ( T 91).
The lever is spring loaded to the central position. In this
position the dozer will not move.
Raise Dozer 'A'
To raise the dozer pull the lever backward. At the required
position release the lever.
Lower Dozer 'B'
To lower the dozer push the lever forward until an
increased resistance is felt and the blade moves. At the
required position release the lever.
HE Services