Routine Maintenance
Fuel System
238 238
9811/9950-1
Bleeding the System
!MWARNING
To bleed the injectors you must turn the engine. When
the engine is turning, there are parts rotating in the
engine compartment.
Before starting this job make sure that you have no
loose clothing (cuffs, ties etc) which could get caught
in rotating parts.
When the engine is turning, keep clear of rotating
parts.
2-3-3-8
1 Get access to the engine. Refer to Access Panels,
Engine Cover.
2 To bleed air from the filter, slacken bleed screw A.
Switch ignition to ON position (This will start the
electric fuel pump). K
Fig 93. ( T 239).
3 Retighten bleed screw A when all air has been
removed.
To Next Page
Loading...
