Routine Maintenance
Access Panels
209 209
9811/9950-1
Access Panels
Introduction
T3-100
When placed in their maintenance position, the access
panels give you access to parts or areas of the machine
that are not required during machine operation.
Before you operate the machine, make sure that all of the
access panels are in their operation position and secure.
Engine Cover
Opening the Cover
!MWARNING
The engine has exposed rotating parts. Switch OFF the
engine before working in the engine compartment. Do
not use the machine with the engine cover open.
5-2-6-5
!MWARNING
Touching hot surfaces can burn skin. The engine and
machine components will be hot after the unit has
been running. Allow the engine and components to
cool before servicing the unit.
10-1-1-40
1 Make the machine safe with the excavator lowered,
Refer to Prepare the Machine for Maintenance.
2 Unlock the cover using the starter key. Release the
latch by pushing button A and pulling up handle B at
the same time.
The cover will automatically open and be supported
on a gas strut.