jcb 8026 CTS User Manual

Operation
Storage of the Machine
158 158
9811/9950-1
1 Clean the machine to remove all unwanted material
and corrosives.
Remove the grease or petroleum jelly from the ram
piston rods.
2 Install a charged battery.
3 Examine all fluid levels. Top up if necessary.
4 Start the engine.
5 Operate the hydraulic controls.
Make sure that the hydraulic functions operate
correctly.
6 Prepare the machine for storage. Refer to Put the
Machine into Storage.
Take the Machine Out of Storage
T2-079
1 Examine the coolant condition. Replace If necessary
2 Examine all fluid levels. Top up if necessary.
3 Clean the machine to remove unwanted material and
corrosives.
Remove the grease or petroleum jelly from the ram
piston rods.
4 Install a charged battery.
5 Start the engine.
6 Operate the hydraulic controls.
Make sure that the hydraulic functions operate
correctly.
HE Services

jcb 8026 CTS Specifications

General

Brand	jcb
Model	8026 CTS
Category	Excavators
Language	English