Operation
Working with the Machine
119 119
9811/9950-1
Working with the Excavator
Introduction
P2-2020
Before you start using the excavator, you must convert the
machine into a safe and stable working platform. Refer to
Preparing to use the Excavator (Operation Section).
To use the excavator efficiently and safely you must know
the machine and have the skill to use it. This manual
instructs you on the machine, its controls and its safe
operation. It is not a training manual on the art of
excavating. If you are a new operator, get yourself trained
in the skills of using the excavator before trying to work
with it. If you don't, you will not do your job well, and you
will be a danger to yourself and others.
If you will be working with a labourer, make sure you both
understand what each other will be doing. Learn and use
the recognised signalling procedures. Do not rely on
shouting - he will not hear you.
Make sure the correct bucket for the job is fitted. For
instructions for removing and installing buckets, refer to
Optional Attachments.
!MWARNING
When using the boom and dipper fully extended, take
the following precautions, otherwise the machine
could get damaged or become unstable and a danger
to you and other people.
Make sure you do not exceed the working capacity of
the boom at maximum reach. Swing the boom slowly
to prevent any chance of the machine becoming
unstable. For the same reason avoid dumping
downhill if possible.
8-2-9-28
To Next Page
Loading...
