Routine Maintenance
Hydraulic System
240 240
9811/9950-1
Hydraulic System
Introduction
!MWARNING
The temperature of the hydraulic oil will be high soon
after stopping the engine. Wait until it cools (less than
40°C) before beginning maintenance.
8-3-4-10
!MWARNING
Fluid Under Pressure
Fine jets of fluid at high pressure can penetrate the
skin. Keep face and hands well clear of fluid under
pressure and wear protective glasses and gloves.
Hold a piece of cardboard close to suspected leaks
and then inspect the cardboard for signs of fluid. If
fluid penetrates your skin, get medical help
immediately.
INT-3-1-10_3
!MWARNING
Hydraulic Pressure
Hydraulic fluid at system pressure can injure you.
Before connecting or removing any hydraulic hose,
residual hydraulic pressure trapped in the service
hose line must be vented. Make sure the hose service
line has been vented before connecting or removing
hoses. Make sure the engine cannot be started while
the hoses are open.
INT-3-1-11_2
!MCAUTION
Using incorrect fluid could damage the system. See
Fluids, Capacities and Lubricants for the correct fluid.
The fluid can harm your skin. Wear rubber gloves.
Cover cuts or grazes.
2-3-5-1_2
To Next Page
Loading...
Need help?
General
