jcb 8026 CTS - Fire Extinguisher (if Fitted); Checking the Fire Extinguisher

Routine Maintenance
Fire Extinguisher (if fitted)
250 250
9811/9950-1
Fire Extinguisher (if fitted)
T3-022
Checking the Fire Extinguisher
Check the fire extinguisher for damage, security and signs
of leaking.
Check that the gauge A indicates that the extinguisher is
charged i.e. the needle is in the GREEN segment.
Note: If the needle is in or very near the RED segment at
either end of the gauge, the extinguisher must be serviced
or replaced.
Make sure the safety pin B is fitted and secure.
The extinguisher should be serviced every 12 months by a
suitably qualified person.
Fig 99.
HE Services