EasyManua.ls Logo

jcb 8026 CTS - Working with the Dozer

jcb 8026 CTS
332 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
Working with the Machine
133 133
9811/9950-1
Working with the Dozer
Introduction
P11-2026
Remember that you will be driving the machine while you
are using the dozer. Keep alert for bystanders, animals and
possible hazards.
Ensure the slew lock is engaged when working with the
dozer.
Dozing and Grading
Keep the bottom of the dozer parallel to the ground. When
grading a site remove high spots first, then use this soil to
fill in troughs. Do not use excessive downward pressure on
the dozer or machine traction could be lost. When working
with the dozer, set the excavator straight with the machine,
as for road travel. Keep the dozer high when travelling as
this increases the machines ground clearance.
732010-5
Fig 62.
HE Services

Table of Contents

Other manuals for jcb 8026 CTS

Related product manuals