Introduction
Safety Check List
16 16
9811/9950-1
!MWARNING
You could be killed or seriously injured if you operate
a machine with a damaged or missing ROPS/FOPS. If
the Roll Over Protection Structure (ROPS)/Falling
Objects Protection Structure (FOPS) has been in an
accident, do not use the machine until the structure
has been renewed. Modifications and repairs that are
not approved by the manufacturer may be dangerous
and will invalidate the ROPS/FOPS certification.
INT-2-1-9_6
!MWARNING
Machines with a TOPS structure are equipped with a
seat belt. The TOPS structure is designed to give you
protection in an accident. If you do not wear the seat
belt you could be thrown off the machine and crushed.
You must wear a seat belt when using the machine.
Fasten the seat belt before starting the engine.
2-2-1-9
!MWARNING
Hillsides
Operating the machine on hillsides can be dangerous
if proper precautions are not taken. Ground
conditions can be changed by rain, snow, ice etc.
Check the site carefully. When applicable, keep all
attachments low to the ground.
8-1-1-1
!MWARNING
Visibility
Accidents can be caused by working in poor visibility.
Use your lights to improve visibility. Keep the road
lights, windows and mirrors clean.
Do not operate the machine if you cannot see clearly.
5-1-4-7
To Next Page
Loading...
Need help?
General
