Introduction
Identifying Your Machine
40 40
9811/9950-1
ROPS, TOPS and FOGS
!MWARNING
Modified and wrongly repaired ROPS, TOPS & FOGS
Structures are dangerous. Do not modify the TOPS
Structure. Do not attempt to repair the ROPS, TOPS &
FOGS Structure. If the ROPS, TOPS & FOGS Structure
has been in an accident, do not use the machine until
the structure has been inspected and repaired. This
must be done by a qualified person. For assistance,
contact your JCB dealer. Failure to take precautions
could result in death or injury to the operator.
5-3-1-7_2
Machines built to ROPS and TOPS standards have an
identification label fitted to the cab. K
Fig 6. ( T 40).
A bolt on falling object guard is available which also carries
a certified label. This label certifies the cab to FOGS
standard. K
Fig 7. ( T 41).
When a machine is used in an application with the risk of
falling objects, the machine must be equipped with the
optional FOGS guard. This guard is compliant to
ISO10262 level 1 and is intended for protection from small
objects, e.g. small rocks, small debris and other small
objects encountered in operations such as highway
maintenance, landscaping and other construction site
services.
Fig 6.
To Next Page
Loading...
