jcb 8026 CTS - Page 89

Operation
Drive Controls, Switches and Instruments
71 71
9811/9950-1
Console and Seat Switches
Beacon
339711-1
Two position rocker switch. The switch
functions operate when the starter switch
is in the ON and OFF positions.
Position 1: OFF
Position 2: ON
Before you operate the switch, refer to Beacon.
Work Lights
340100-1
Two or three position rocker switch. The
switch functions operate when the starter
switch is in the ON position.
Position 1: OFF
Position 3: Boom and cab work lights ON
(Cab machines only)
Position 2: Boom work light ON
Rear Window Wiper (if fitted)
340070-1
Three position rocker switch. The switch
functions operate when the starter switch
is in the ON position.
Position 1: OFF
Position 3: ON
Position 2: Washer ON (if fitted)
Note: The wiper will self-park when switched off.
Overload Warning Switch (if fitted)
T034110-2
Two position rocker switch. The switch
functions operate when the starter switch
is in the ON position.
Position 1: OFF
Position 2: ON
Before you operate the switch, refer to Overload
Warning System (if Fitted).
HE Services