Chapter 7 Test Results
Frame relay results
98 SmartClass E1 Tester User’s Guide
Frm Octets Rx Count of the total number of frame octets detected. The
frame octets include all octets between the flags of the
frame relay frame (for example, the address field, the
information field, and the FCS field).
Avg Frm Size Rx Calculates the average size of received frames (frame
octets ÷ frame count).
Avg Frm Rate Rx The average number of frame relay frames received
per second, since the start of the test (frame count ÷
total seconds).
Max Frm Rate Rx The maximum number of frame relay frames received
since the start of the test.
% Util Current link utilization during the last second.
Avg % Util The average percentage of link utilization on the
received channel since the start of the test. Calculated
as total frame relay octets in frames (excluding flags,
including overhead) ÷ total octets (idle and frame data)
received.
Max % Util The maximum percentage of link utilization on the
received channel since the start of the test.
Thrput(bps) Rx The current received throughput, in bits per second,
measured over the last second.
Avg Thrput(bps)Rx The average received throughput since the start of the
test, calculated as frame octets ÷ total seconds.
Max Thrput(bps)Rx The maximum received throughput since the start of
the test.
FECN Frms Rx Count of the frame relay frames with the FECN bit set.
% FECN Frm Rx Percentage of total frame relay frames with the FECN
bit set.
BECN Frm Rx Count of the frame relay frames received with the
BECN bit set.
% BECN Frm Rx Percentage of total frame relay frames with the BECN
bit set.
DE Frm Rx Count of frame relay frames with the DE bit set.
% DE Frm Rx Percentage of total frame relay frames with the DE bit
set.
CR Frm Rx Count of the frame relay frames received with the C/R
bit set.
% CR Frm Rx Percentage of total frame relay frames received with
the C/R bit.
FCS Err Frm Count of frame relay frames with FCS errors.
Short Frm Count of frame relay frames containing less than four
octets between frame flags.
Long Frm Count of frame relay frames exceeding the length
specified as the long frame threshold.
Test Frm Rx Count of the total number of frame relay frames
detected for the link.
Table 31 Link results (Continued)
Result Definition
To Next Page
Loading...
