JDS Uniphase SmartClass E1 - Chapter 5 Datacom Testing; Datacom Testing

5
SmartClass E1 Tester User’s Guide 51
Chapter 5 Datacom Testing
This chapter provides information about using the E1/Datacom Tester for data
communications testing. Topics discussed in this chapter include the following:
– “About data communications testing” on page 52
– “Launching the datacom application” on page 52
– “Specifying test settings” on page 53
– “Connecting the E1/Datacom Tester to the circuit” on page 61
– “BER Testing” on page 63
– “Monitoring a Datacom interface” on page 64
– “Frame Relay testing” on page 64