Chapter 2 Instrument Settings
Setting the language
18 SmartClass E1 Tester User’s Guide
Setting the language
The following instructions explain how to specify the language for your
SmartClass E1Tester.
To specify the language for the SmartClass E1 tester
1 Power ON your tester by pressing and holding the key for a few
seconds.
The SmartClass E1 splash screen appears briefly, and then the
SmartClass E1 main menu appears.
2 Select System Settings. A menu appears listing each of the system
settings.
3 Select Language. A menu appears listing the available languages.
4 Select the language. After a brief moment, the main menu appears, and
options appear in the language you selected.
The language for the E1 Tester is specified.
Viewing the software and hardware information
The Version Info screen displays the current version of the software loaded on
your unit, whether your hardware is jitter capable, and the factory-assigned
SCE ID number.
To view the software and hardware information
1 Select System Settings from the Main Menu.
2 Select Version Info.
The software version and SCE ID Number appear. The screen may also
display “Jitter-capable hardware”.
NOTE:
If you select the wrong language by mistake, you can return to the language
selection menu by selecting the last item on the Main Menu, and then the
last menu on the System Settings menu.
NOTE:
The jitter option requires both newer hardware and an option code. Thus,
having hardware that is jitter capable does not guarantee that the option is
enabled. To verify whether your unit includes the jitter option, view the E1
Measurement menu. If it includes a selection for E1 Jitter, the option is
enabled.
To Next Page
Loading...
