JDS Uniphase SmartClass E1 - Link Results

Chapter 7 Test Results
Frame relay results
SmartClass E1 Tester User’s Guide 97
Link results Table 31 lists results in the Link category. These results apply to the entire link.
% Util Current link utilization during the last second.
Avg % Util The average percentage of link utilization on the
received channel since the start of the test. Calculated
as total frame relay octets in frames (excluding flags,
including overhead) ÷ total octets (idle and frame data)
received.
Max % Util The max percentage of link utilization on the received
channel since the start of the test. Calculated as total
frame relay octets in frames (excluding flags, including
overhead) ÷ total octets (idle and frame data) received.
Thrput(bps)Rx Current received throughput during the last second.
Avg Thruput (bps) Rx The average received throughput since the start of the
test, calculated as frame octets ÷ total seconds.
Max Thruput (bps) Rx The maximum received throughput since the start of
the test.
Long Frm DLCI Count of frame relay frames exceeding the length
specified as the long frame threshold.
FECN Frms Rx Count of the frame relay frames with the FECN bit set.
% FECN Frms Rx Percentage of total frame relay frames with the FECN
bit set.
BECN Frm Rx Count of frame relay frames with the BECN bit set.
% BECN Frm Rx Percentage of total frame relay frames with the BECN
bit set.
DE Frm Rx Count of frame relay frames with the DE bit set.
% DE Frm Rx Percentage of total frame relay frames with the DE bit
set.
CR Frm Rx Count of frame relay frames received with the C/R bit.
% CR Frm Rx Percentage of total frame relay frames received with
the C/R bit.
Test Frm Rx DLCI Count of the total number of frame relay frames
detected for the DLCI.
Test Frm Lost Count of frame relay frames lost by the network based
on gaps in sequence numbers.
% Test Frm Lost Percentage of total frame relay frames lost by the net-
work based on gaps in sequence numbers.
Table 30 DLCI results (Continued)
Result Definition
Table 31 Link results
Result Definition
Link Status Indicates whether the link is up or down.
Frm Cnt Rx Count of the total number of frame relay frames
detected.