Appendix B Specifications
Physical specifications
124 SmartClass E1 Tester User’s Guide
Physical specifications
Table 52 provides the physical specifications for the SmartClass E1 tester with
batteries.
Environmental specifications
Table 53 provides the environmental specifications without batteries.
Power specifications
Although battery life varies, depending on the type of battery and the type of
test, Table 54 provides specifications for the battery life of the recommended
Energizer
® 2500 mAh NiMH rechargeable batteries, and the specifications for
the AC adapter.
Table 52 Physical specifications
Parameter Specification
Size (H x W x D) 230 x 120 x 50 mm
Weight <2 lbs (1 kg)
Display 320 x 240 pixel color display
Table 53 Environmental specifications
Parameter Specification
Operating Temperature 0
° to +50° C (32° to +120° F)
Storage Temperature
a
a. Without Batteries
-10° to 60° C (-50° to 140° F)
Humidity 10% to 80% RHNC
Table 54 Power specifications
Parameter Specification
Operating time
(at 25
° C)
Under typical conditions:
– if running in E1 mode: should provide 5 hours
continuous use
– if running in Datacom mode: should provide 2
hours continuous use
Charging time
(at 25
° C)
Under typical conditions for empty to full charge:
– With unit OFF: Up to 5 hours
– With unit ON: Up to 7 hours
Charging temperature 15
° to +35° C (59° to +95° F)
Power supply input 100 to 240 VAC, 50/60 Hz, autosensing
Power supply output 12 V, 1.25 Amp
To Next Page
Loading...
