JDS Uniphase SmartClass E1 - Instrument Settings

2
SmartClass E1 Tester User’s Guide 17
Chapter 2 Instrument Settings
This chapter describes how to configure the basic settings of the instrument.
Topics discussed in this chapter include the following:
– “Setting the language” on page 18
– “Viewing the software and hardware information” on page 18
– “Setting the date and time” on page 19
– “Adjusting the contrast and brightness” on page 20
– “Determining the specified battery type” on page 20
– “Managing files” on page 20
– “Setting options” on page 21
– “Restoring factory defaults” on page 21