Chapter 1 Getting Started
Navigating the user interface
SmartClass E1 Tester User’s Guide 11
– To conserve power and completely power OFF your unit, select Shut
Down. A message briefly appears informing you that the unit is shut-
ting down.
Power is OFF.
Navigating the user interface
The user interface of the SmartClass is designed to be intuitive and easy to
use. Using the LCD and keypad, you can set up the unit, configure test param-
eters, and view test results. This section describes the user interface, and
explains how to navigate through the menus and screens.
When you power up the SmartClass E1 Tester, the Main Menu of the user
interface appears. Figure 5 illustrates the Main menu for the SmartClass E1/
Datacom tester.
There are 3 types of screens on the user interface:
– Menus
– Data entry screens
– Results screens
Figure 5 SmartClass E1/Datacom Tester Main Menu
To Next Page
Loading...
