CONTROL SYSTEM
TC-15001-rev.3
6-47
3
,QVWDOOWKH,5UHFHLYHUNLWXVLQJWKHOHQJWKRI
connecting cable (accessory).
The cable length is approximately 17 ft. (5m).
4
2SHQWKHFRYHURIWKH,5UHFHLYHUNLW
Push the slotted screwdriver with a tip width of
approximately 1/4 inch (6mm) into the slot of the
,5UHFHLYHUNLWFRYHUDQGURWDWHLWWRRSHQWKH
FRYHUDVVKRZQLQWKH¿JXUHDWWKHULJKW
1
3HUIRUPWKHLQVWDOODWLRQZRUNIRUWKH,5UHFHLYHUNLWZKLOHWKHLQGRRUXQLWLVEHLQJLQVWDOOHG
2
7XUQ2))WKHSRZHUVRXUFHIRUWKHLQGRRUXQLWLIWKH,5UHFHLYHUNLWLVDWWDFKHGDIWHUWKHLQGRRUXQLWLV
installed.
5
0RXQWWKH,5UHFHLYHUNLWRQWRWKHZDOORUWKHFHLOLQJVXUIDFHDVVKRZQEHORZ
< Situation A >
6HFXUHWKHEUDFNHW
< Situation B >
3UHSDUHWKH¿HOGVXSSOLHGVZLWFKER[-,6
Box). (JIS C8340)
Slot
IR Receiver Ki
t
Cover
Mounting Bracket
Rotate
Push and rotate.
Slotted Screwdriver
(Tip Width:
A
pprox. 1/4 inch (6mm))
Securing Scre
(Accessory)
Secure the bracket with four
accessory securing screws.
Any of the following Switch Boxes
can be utilized.
1. Switch Box for One Switch
(Without Cover)
2. Small Switch Box for One Switch
(Without Cover)
3. Switch Box for One Switch
(With Cover)
G Metal Conduit
(larger than I.D. φ25/32 inch (φ20mm)
G
Two Securing Screws (M4, Field-Supplied)