12 IFC-3030 Installation Manual — P/N 52024:C 08/05/2005
System Overview System Components
2.2 System Components
Central Processing Unit (CPU) The central processing unit for the IFC-3030 system can be
ordered with a keypad/display (P/N JCPU-3030D) or without a keypad/display (P/N
JCPU-3030ND). JCPU-3030D serves as “primary display” version for ULC applications.
JCPU-3030ND is intended for use in network applications; LEDs and momentary switches on the
printed circuit board mimic those on the keypad to enable operation and trouble-shooting at the
panel when it is used without a local primary display.
Power supply The main power supply is AMPS-24/AMPS-24E, which provides +24 VDC
power and a battery charger for a basic system. Auxiliary power supplies and/or battery chargers
are available to customize large systems.
Enclosures Four cabinet sizes are available; doors and backboxes are ordered separately. “A”
size backboxes hold one row of modules, “B” size backboxes hold two rows, “C” size backboxes
hold three rows, and “D” size backboxes hold four rows. See Section 2.4 “System Cabinets” for
basic description. A variety of dress panels, trim rings, and blank modules are available to
accompany specific combinations of system equipment; contact Johnson Controls for a complete
parts list.
SLC Loops: LCM-320, LEM-320 To provide one SLC loop, connect one LCM-320 to the
panel. Connect an LEM-320 to the LCM-320 to provide a second loop. Up to five pairs of modules
can be installed on the panel to provide a maximum of ten SLC loops.
Network connection Connect an NCM-W or NCM-F to provide a connection to Noti•Fire•Net
(network version 5.0 or higher).
Annunciators The IFC-3030 supports ACM-24AT/ACM-48A (and their expanders) with either
64 or 96 points at an address, as well as ACM-16AT/ACM-32A/LDM-32 (and their expanders)
with 64 points at an address and other ACS devices. (See Section 2.5 “Compatible Equipment” if
looking for specific ACS devices.)
Panel Circuit Modules These include both output modules (ICM-4RK/ICE-4, CRM-4RK/
CRE-4, ARM-4, VCM-4RK/VCE-4, DCM-4RK/VCE-4) and input modules (IZM-8RK/IZE-A).
For installation information about VCM-4RK and DCM-4RK, see the
Johnson Controls Voice
Alarm System Manual.
To Next Page
Loading...
Need help?
General
