6 Installation—Installing the FC-2000
Before proceeding, the installer should be familiar with the following
documents (as appropriate):
● UL 38 Manually Actuated Signaling Boxes
● UL 217 Smoke Detectors, Single and Multiple Station
● UL 228 Door Closers--Holders for Fire Protective Signaling Systems
● UL 268 Smoke Detectors for Fire Protective Signaling Systems
● UL 268A Smoke Detectors for Duct Applications
● UL 346 Waterflow Indicators for Fire Protective Signaling Systems
● UL 464 Audible Signaling Appliances
● UL 521 Heat Detectors for Fire Protective Signaling Systems
● UL 864 Standard for Control Units for Fire Protective Signaling
Systems
● UL 1481 Power Supplies for Fire Protective Signaling Systems
● UL 1638 Visual Signaling Appliances
● RS-232D Serial Interface Standards
● RS-485 Serial Interface Standards
● NEC Article 300 Wiring Methods
● NEC Article 760 Fire Protective Signaling Systems
In addition, you must adhere to the standards of the applicable local and
state building codes and requirements of the local Authority Having
Jurisdiction (AHJ).
UL Documents
Other
Standards and
Documents
To Next Page
Loading...
Need help?
General
