28
Operation instructionMain switch
Functions of the respective switch positions are as follows:
OFF:
All electrical components are switched off except for the turning signals. The ignition key
can only be removed in the OFF position
ON1:
All electrical circuits are supplied with power, except
the ignition system and fuel system, the headlights and
taillights come on when the light switch is on.
ON 2:
The ignition system and fuel system are supplied with power.
START:
The electric starter is engaged by turning and holding the key in this position. Release
the key when the engine starts.
Do not operate the electric starter continuously for more than 5 seconds, or starter
damage could occur. Wait at least 5 seconds between each operation of the electric
starter to let it cool.
Do not turn the key to the "START" position with the engine running, or damage to the
electric starter can result.
See starting instructions prior to starting the engine.
Battery switch
The battery connects battery to all of circuits. Turn off the battery switch when the vehicle
is stored for a long time to save power.
1. Align the bulge on the key to the channel in the switch body.
2. Insert the key and turn clockwise.
3. So the battery is connected to other circuits, and the vehicle can work.
OFF
ON 1
ON 2
START
MAIN SWITCH
To Next Page
Loading...
