52
round until the cable get a proper tension.
Spot light adjustment
To get the desired spot-light position, adjust as following steps:
Solution 1
1. Loosen the spot light adjustment nut, and turn the spot light forwards and backwards
until find the desired position.
Solution 2
2. Loosen the adjustment nuts on at the both ends of spot light lever, and then rotate
the lever clockwise to pull the spot light support up, or counter clockwise to push the
spot light support down.
Screw sleeve
Thin nut
Adjustment nut
Spot light adjustment nut
Adjustment nut
Spot light
To Next Page
Loading...
