Joyner TROOPER-T2 - Front Wheel Replacement; Rear Wheel Replacement

54
Front Wheel Replacement
It is not needed to disassemble the center castle nuts when you replace the front wheels
or the rear wheels. Just take off these 5 cap-nuts, and replace the wheels with a new one.
Tighten these 5 nuts after replacing the wheels, the wheel need to be assembled by a
JOYNER authorized dealer.
Castle nuts
Torque:180±5 N*M/182±3.5FT_LB
Wheel nuts
Torque:70±5 N*M/51±3.5FT_LB
Rear Wheel Replacement
It is not needed to disassemble the center castle nuts when you replace the front wheels
or the rear wheels. Just take off these 5 cap-nuts, and replace the wheels with a new one.
Tighten these 5 nuts after replacing the wheels, the wheel need to be assembled by a
JOYNER authorized dealer.
Castle nuts
Torque:180±5 N*M/182±3.5FT_LB
Wheel nuts
Torque:70±5 N*M/51±3.5FT_LB