33
z Adjust the parking cable if necessary.
z Be sure to fully release the parking brake lever before driving the vehicle.
z It is allowed use the parking lever as an emergency brake if the foot brake can’t
work.
Drive select lever
The drive select lever is used to shift your
vehicle into the 1,2,3,4,5 and R gear positions.
z Never start the vehicle at 3, 4 or 5 gear
z Stop the vehicle fully before shifting to reverse.
z When reversing, the reverse indicator “R” comes on.
Differential control handle
Moving the differential control handle up and down to make the differential work and
locked, 2 handles control front differential and rear differential respectively. Choose the
work mode that you need according to the terrain situation. The following work mode is
available:
z 2DW(2 driven wheels):
1. Rear differential.
2. Rear differential locked
z 4DW(4 driven wheels):
1. Rear differential and front differential.
2. Rear differential locked and front differential.
3.
Rear differential locked and front differential locked
Shift the handles right side and pull down, then stop the handle in the differential locked
position.
Rear diff lock handle
Front diff lock handle
To Next Page
Loading...
