To Next Page

To Previous Page

5. Setup of the PC for receiving FAX image (Option)

JAX-9B W-FAX Installation Manual

7ZPNA4096

14) The PC is restarted automatically. Wait for a moment.

15) Remove the CD-ROM from the PC.

5.2. ”The Found New Hardware wizard” of the RS-422/USB converter

1) Connect the RS-422/USB converter to the PC by the attached USB cable.

2) The following screen appears after a few seconds.

Click the [Next] button after checking that “Install the software automatically [Recommend]” is selected.

3) Click the [Continue Anyway] button on the following screen.

Other manuals for JRC JAX-9B

Questions and Answers:

Need help?

Do you have a question about the JRC JAX-9B and is the answer not in the manual?

General