Chapter9 Appendix
VDR/S-VDR Real Time Monitor / Installation Manual
120
(2) In order to send the Script file to the VDR IF, connect the VDR IF setting cable as follows.
(3)Start the Hyper Terminal software, and set as follows.
Please refer to “9.3 Hyper Terminal Setup” for more detail.
Item Value
Bits per second 9,600bps
Data bits 8
Parity None
Stop bits 1
Flow control Hardware
Emulation VT100J
Backspace key sends Delete
Input Translation
Shift－JIS(S)
(4)Input the following user name and password, and log into the VDR IF.
login: manager Enter
Password: friend Enter (The input password is not displayed on screen.)
To Next Page
Loading...
