3ņ107
[3] Erasing Trails File
x Presse [3] key.
The saved trail files are displayed.
x Select the file to be erased.
Confirmation warining is displayed.
Select “Yes” for erasing.
Note: Deleted files can not be restored, so Erase files carefully.
Erasing the displayed trails partially.
Erasing the part of the displayed trails by using the cursor as a eraser.
Note: Deleted trails can not be restored, so Erase them carefully.
Procedure 1 Press [RADAR MENU] key twice.
Press [7] key.
Alternatively, hold down the [TRAILS]
key until the menu appears.
Press [9] key.
Press [4] key.
Trail erase menu will appear.
[1] Trails Erase Mode
Press [1] key.
z Trail erase mode is enabled.
z On the mode, cusor is fixed on the menu, and the eraser (white box) is displayed on
the own ship positon.
z Using the trackball, positon the eraser on the Trail to be deleted.
[2] Trails Erase start
Press [2] key.
z Trail erase function starts.
Using the track ball, wipe out trails.
z Press [2] key again to disable the function temporally.
The depth input scre
To Next Page
Loading...
