ņ61
7.5.6 Update of AIS Processor Program (AIS PROC Program Update)
AIS processor programs can be updated by using a flash memory card. In order to update AIS processor
programs, the flash memory card (optional) containing the update program file must be inserted in the card slot
2 beforehand.
[I] Transmission Time Clear (TX Time Clear)
Clear the transmission time of the antenna unit.
Perform the following procedure to clear the transmission time when the magnetron is replaced.
Procedure 1 Insert the flash memory card,
containing the update program file for
AIS processor programs, into the CARD
slot 2.
2 Hold down [RADAR MENU] key.
The Code Input Menu will appear.
3 Press [0] key.
4 Move the cursor onto the “ENT” button
in the Code Input menu, and press
[ENT] key.
The Adjust Menu will appear.
5 Press [2] key.
The Maintenance Menu will appear.
6 Press [8] key.
The window asking whether to update AIS processor programs and whether to execute
character strings will open.
1 YES: Program update execution
2 NO: Program update cancel
When 1. YES is selected:
The AIS processor programs on the flash memory card are updated read into the
equipment.
Follow the displayed instructions during program update.
Do not turn off this equipment during program update.
To Next Page
Loading...
Need help?
General
