11.6 PROCESSOR UNIT (NDC-1460)
11ņ14
yyy
yyyy
yyyy
11
11.14 PROCESSOR UNIT (NDC-1460)
(1) Structure Desk Top Type (Horizontal putting and length putting using
combinedly)
(2) Dimensions Height 125mmuWidth 340mmuDepth 347mm
(3) Mass Approx. 4kg
(4) Tune Method AUTO/MANUAL (Bar-graph indicate)
(5) STC (SEA) AUTO/MANUAL
(6) FTC (RAIN) AUTO/MANUAL
(7) Radar Interference Rejection Built-in (The effect can be adjusted by three stages.)
(8) Scan Correlation Function1/2/3, 2 Peak Hold Processing1/2
Automatic change of processing method.
(Target range synchronize/Clutter synchronize)
(9) Bearing Marker 360° in 1° digit.
Relative motion: Fixation
True motion: Rewrite at a position correct in every scan.
(10) Heading Line Electronic
(11) Radar Alarm Invasion, Secession, OFF can be Selected.
With buzzer sound.(Possible to output to External buzzer.)
Ring, operating in rș space, relative position
Automatically acquisition by TT described in Section “TT”
(12) Off Center Within 66% of the radius of any range. (Except 96nm)
Can be operated in all mode in relative motion.
Trail is succeed at Off Center mode.
(13) True motion Unit Built-in (Except 96nm)
(14) True motion reset position 66% of radius of any range.
Possible to manual reset.
To Next Page
Loading...
Need help?
General
