8.2 MAINTENANCE ON EACH UNIT
ņ2
8
yyyy
yyyy
8.2 MAINTENANCE ON EACH UNIT
8.2.1 Scanner Unit NKE-2043/2062/2063A/2103/2254
After the work, turn "ON" the scanner unit safety switch.
DANGER
When conducting maintenance work on the antenna,
make sure to turn its main power off.
Failure to comply may result in electrocution or
injuries.
Make sure to turn off the antenna operation switch.
Failure to comply may result in injuries caused by
physical contact with the rotating antenna.
Do not touch the radiator. Even if the power is turned
off, the radiator may be rotated by the wind.
To Next Page
Loading...
