3.10 USE FUNCTION SWITCH
3ņ144
3
y
y y
[II] Saving Operation Status (Save PIN Data)
Procedure 1 Press [RADAR MENU] key twice.
Press [8] key.
The Radar Sub Menu will appear.
2 Press [1] key.
The PIN Setting Menu will appear.
3 Press [2] key.
The Save PIN Data Menu will appear.
4 Select the number corresponding to
the place where you want to save
status, pressing the numeric keys [1] to
[5].
The Code Input Menu will appear.
5 Using numeric key, enter the name and
then move the cursor onto the “ENT”
button and press [ENT] key.
Data will be saved with the entered name.
Exit 1 Press [RADAR MENU] key.
The Target Information Display Menu will
reappear.
To Next Page
Loading...
