Accessing the Frame Rate Function
1.Press the Scroll and Channel keys at the same time and
hold.
2.Turn on the transmitter power switch to enter the System
mode.
3.Press the Scroll key until “FRM” appears on the screen.
4.Press the Increase or Decrease key to select the desired
frame rate (N or F).
5.Press the Scroll key to access the Auxiliary Channel 3
function.
6.To exit the System mode, either turn the transmitter
power switch off or press the Scroll and Channel keys at
the same time.
System Mode
16
Frame Rate Select
The Frame Rate function allows you to select one of two
transmitter frame rates available: Normal “N” - the default
or Fast “F”. The Normal Frame Rate should be selected if
you are using only non-digital servos. The Fast Frame Rate
may be selected if you are using at least one digital servo.
Note: The Frame Rate function offers quicker
response times in the “F” or Fast mode. Some types
of non-JR servos are not compatible in the “F” Fast
mode and require the radio to be operated in the
“N” Normal mode.
Current
Frame Rate
frm
F
Press and hold the Scroll and Channel keys at the
same time while turning the transmitter power
switch on. Next, press the Scroll key until “FRM”
appears.
Press the Increase or Decrease key to select the
desired frame rate.
SCROLL
ENTER
CHANNEL
INCREASE
CLEAR
DECREASE
To Next Page
Loading...
