EasyManua.ls Logo

JUKI HZL-NX7 - 8. Message Catalog

JUKI HZL-NX7
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
114
6
Use both hands to hold the fabrics and
move it without letting it loose.
The target stitch length is about 1.5 to 2.0
mm.
7
Press the feed dog icon to lift the feed
dog after you have completed free-motion
stitching.
The feed dog will be up and engaged at the same time
as the machine starts to sew.
How to lock stitches
At sewing start, pull up the bobbin thread on the top layer of the fabric, hold both needle and bobbin threads
together and sew 3 stitches on the same point. After that move fabrics as you wish.
In this way, stitches on the wrong side of the fabrics look neat.
At sewing-end sew 3 stitches on the same point and stop.
How to sew stitches with the same stitch length
When the foot controller is used, the fabrics can be guided by both hands and you can move the fabrics
freely.
Set the speed controller to medium or medium low  rst, press the foot controller completely and move the
fabrics.
→ if stitches become too large, set the speed controller to “faster”
→ if stitches become too small, set the speed controller to “slower”.
Tips
* The quilt ruler is also applicable.

Table of Contents

Other manuals for JUKI HZL-NX7

Related product manuals