92
Press the zigzag width icon.
Turn the adjusting dial (left)
clockwise.
(Turn the handwheel to check the nee-
dle entry point. When adjusting, make
sure the needle is in the up position.)
Press the zigzag width icon.
Turn the adjusting dial (left)
counterclockwise.
(Turn the handwheel to check the needle
entry point. When adjusting, make sure
the needle is in the up position.)
2. If the stitches fail to reach the folded edge
1. If the stitches reach too far beyond the folded edge
■
When changing the needle entry point
Adjusting Dial (Left)
Adjusting Dial (Left)
To Next Page
Loading...
