JUKI SC-922 Engineer's Manual

– 44 –
12. Use the key or to set the value of SPd2 to “1500”.
13. Use the key to determine the set value.
14. Use the key or to select “_End”.
15. Use the key or to end the setting, and the function setting mode re-
sumes.
16. Use the key to display function setting No. 163.
17. Use the key or to select “1” for the setting value, which enables the
limit.
A graph of the speed limit at the settings above is displayed.
2
P
d
S
0
5
1
0
L
S
d
S
P
d
L
S
d
d
E
n
2
6
1
S
L
d
3
1
6
0
3
1
6
1
0
500
1000
1500
2000
2500
3000
3500
4000
1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5
DL
Speed [sti/min]
Model-specific
Set limit value
Decided limit value
dL1 :3
SPd1 :3500
dL2 :5
SPd2 :1500
Setting examples (for LU-1510N machine head)
The speed is set to 3000 sti/min, 2800 sti/min, 1500 sti/min, and 1000 sti/min, respectively.
1. Select function No. 162 for operation methods of function settings 1 to 3.
2. Use the key or to select the “SPd_” item.
3. Use the key to select “SPd1”.
4. Use the key or to set the value of SPd1 to “3000”.
5. Use the key to determine the set value and select “SPd2”.
6. Use the key or to set the value of SPd2 to “2800”.
7. Use the key to determine the set value and select “SPd3”.
8. Use the key or to set the value of SPd3 to “1500”.
9. Use the key to determine the set value and select “SPd4”.
10. Use the key or to set the value of SPd4 to “1000”.
11. Use the key to determine the set value.
12. Use the key or to select “_End”.
13. Use the key or to end the setting, and the function setting mode
resumes.
14. Use the key to display function setting No. 163.
15. Use the key or to select “1” for the setting value, which enables the
limit.
2
1
6
S
L
d
L
S
d
S
P
d
1
P
d
S
0
1
5
2
P
S
d
0
0
8
2
3
P
S
d
0
5
1
3
P
S
d
0
0
5
1
4
P
S
d
0
5
1
4
P
S
d
0
0
0
1
L
S
d
S
P
d
L
S
d
d
E
n
2
6
1
S
L
d
3
1
6
0
3
1
6
1
1
P
d
S
0
0
0
3
2
P
d
S
0
1
5

JUKI SC-922 Specifications

General

Brand	JUKI
Model	SC-922
Category	Sewing Machine
Language	English