Jung Smart Control SC 1000 KNX - Page 135

Art. No. SC 1000 KNX
Figure 65: Setting of the display formats for the date (left) and for the time (right)
Resetting password
The administrator password that might be necessary for accessing the system page can be
changed if required. The password can only be changed locally on the device via the display
page "Set password". This display page is recalled if the "Password" (1.) button is pressed on
the system page (figure 66).
The display page can be exited without any further actions by pressing the " Z Admin area"
button in the status line. The display then returns to the system page without changing the
password.
Page 135 of 347
Software "Smart Control 501511"
Functional description