1) Bundle Operations
2) Node Synchronization
3) Node Summary
4) Node Diagnostics
5) Node Operations
6) Save Running Database to Flash
------------ Your choice [3]: 2
==========================================================================
= (ctp_74 06/24/15 19:25:18 UTC) | Node Synchronization Menu
==========================================================================
Please select a number from the following list:
-------------------------------------
0) Back to Previous Menu
1) 1st Priority, Reference 0: Disabled
2) 2nd Priority, Reference 1: Disabled
3) 3rd Priority, Reference 2: Disabled
4) 4th Priority, Reference 3: Disabled
5) 5th Priority, Reference 4: Disabled
6) NetRef: Disabled
7) 32 kHz Ref Output: NO
8) Query Node Sync Status
9) Measure Ref Inputs
10) Calibrate Node to Current Reference
------------ Your choice [6]: 6
==========================================================================
= (ctp_74 06/24/15 19:25:38 UTC) | NetRef Menu
==========================================================================
Please select a number from the following list:
-------------------------------------
0) Back to Previous Menu
1) NetRef: Disabled
------------ Your choice [1]: 1
Enable NetRef (0=Off, 1=Master, 2=Slave, 3=Adaptive Bundle)? (0-3)[0]: 2
==========================================================================
= (ctp_74 06/24/15 19:25:42 UTC) | NetRef Menu
==========================================================================
Please select a number from the following list:
-------------------------------------
0) Back to Previous Menu
1) NetRef: Slave
2) NetRef Master IP (Priority 1): 127.0.0.1
3) NetRef Master IP (Priority 2): 127.0.0.1
4) NetRef Master IP (Priority 3): 127.0.0.1
5) NetRef Master IP (Priority 4): 127.0.0.1
------------ Your choice [2]: 2
Configure a NetRef Master? n[y]: y
Enter remote node IP address for NetRef:(rtn for 127.0.0.1)? 10.216.118.73
==========================================================================
= (ctp_74 10/30/15 12:22:08 UTC) | NetRef Menu
125Copyright © 2018, Juniper Networks, Inc.
Chapter 2: Configuring CTP Bundles
To Next Page
Loading...
