CHAPTER 1
Overview of CTP Bundles
•
Types of Bundles Overview on page 3
•
Interface Naming Conventions for the CTP Series on page 4
•
Serial Multiservice Interface Module Overview on page 5
•
Adaptive Clocking Overview for CTP Bundles on page 7
•
Determining Optimal Packet Size for CTP Bundles Overview on page 8
•
Providing QoS for CTP Bundles by Using Service Type Overview on page 10
•
Circuit Startup Process Overview on page 11
•
Transparent Encoding Overview on page 12
•
TDM/TDC Encoding Overview on page 17
Types of Bundles Overview
Table 1 on page 3 shows the typical application for each bundle type, and lists the
interfaces that each type of bundle supports.
Table 1: Bundle Types and Supported Interfaces
Interface Types SupportedGenerally Used ForBundle Type
•
CTP150
•
Serial interface
•
Multiservices interface
•
T1/E1 interface
•
CTP2000
•
Multiservices interface
•
Serial interface
•
Serial interface with T1/E1 daughter
card
•
Serial interface with 4WTO
daughter card
•
Serial interface with IRIG-B
daughter card
•
T1/E1 interface
Connecting legacy serial interfaces to
the IP network
CTP (circuit-to-packet)
3Copyright © 2018, Juniper Networks, Inc.
To Next Page
