Juniper CTP Series User Manual

CHAPTER 5
Monitoring Packet Creation and Reception
and Packet Delay for CTP Bundles
•
Using SCC Counts to Monitor Packet Creation and Reception for CTP Bundles (CTP
Menu) on page 153
•
Using Buffer Sampling to Monitor Packet Delay for CTP Bundles (CTP Menu) on page 154
Using SCC Counts to Monitor Packet Creation and Reception for CTP Bundles (CTP
Menu)
Serial Communications Controller (SCC) counts provide detail about packet creation
and reception for a CTP bundle.
You cannot display SCC counts in CTPView.
To display SCC counts using the CTP Menu:
1. From the CTP Main Menu, select 1) Bundle Operations.
2. Select the type of bundle.
3. Select a bundle from the list.
4. Select 8) Runtime Diags.
5. Select 7) SCC Counts.
A list of packet counters appears. Table 60 on page 153 describes the counters.
Table 60: Statistics for Packet Creation and Reception for CTP Bundles in the CTP Menu
DescriptionField Name
Packets to network from interface. Number of packets that were sent to the IP network from the
interface.
Pkts to NET from I/F
Packets to network interrupts. Number of packets destined for the IP network that were processed
by the software.
Pkts to NET ints
153Copyright © 2018, Juniper Networks, Inc.

Juniper CTP Series Specifications

General

Brand	Juniper
Model	CTP Series
Category	Server
Language	English