0 (*, G) entries
• Example 2—Displays the summary of active multicast routes
host1#show ipv6 mroute summary active
Active IP Multicast Routes >=4000 bps
Group Address Source Address RPF route RPF Iif #Oifs
--------------- ------------ ----------- --------- -----
232.0.0.1 51.0.0.1 51.0.0.0/24 ATM3/1.17 0
232.0.0.2 51.0.0.1 51.0.0.0/24 ATM3/1.17 0
232.0.0.3 51.0.0.1 51.0.0.0/24 ATM3/1.17 0
Counts: 3 (S, G) entries
0 (*, G) entries
• See show ipv6 mroute.
show mroute port count
• Use to display the mroute port outgoing interface, limits, and counts.
NOTE: This command displays information for mroutes on a port across all virtual
routers.
• Field descriptions
• Port—Slot/port value on the router
• Limit—None (reserved for future functionality)
• Count—Number of mroute outgoing interfaces on the specified port
• BW bps—Bandwidth limit (in bits per second)
• Admitted—Bandwidth admitted on the port (in bits per second)
• Example
host1#show mroute port count
BW Priority
Port Limit Count bps BW bps Hysteresis Admitted
----- ----- ----- ----- -------- ---------- --------
1/1/0 None 1 None None 85 0
1/1/1 None 2 15000 10000 85 2000
• See show mroute port count.
show ipv6 mroute count
169Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Configuring IPv6 Multicast
To Next Page
Loading...